上海志琪实业有限公司

Cold forming

冷成形加工XAR400耐磨钢板折弯加工和卷圆加工

 The products made of this steel are suitable for cold bending provided, that consideration is given to the high hardness. The formability of steel decreases with increasing hardness. This has to be kept in mind when forming. The forming must take place at a slow and steady rate, the cut edges must be deburred and the plates heated, if necessary, prior to the forming. A final stress-relieving is not necessary for this steel.

XAR400耐磨钢板这种材料适合冷成形加工，冷成型加工包括耐磨板折弯加工，耐磨板卷圆加工和耐磨油压成型。 但是必须注意这个材料很高的硬度。 随着硬度的提高材料的塑性随之降低，在成形加工时必须考虑这点。成形加工必须以缓慢地、稳步地速度，切割锐角和毛刺必须清除干净，如果有必要，XAR400耐磨钢板在成形加工之前要预热。

如果在加工过程中遇到困难可以咨询上海志琪实业有限公司的相关销售人员。

上海志琪竭诚为您服务。

http://www.zqsteel.com.cn/show_news.asp?s_id=1417